{"id":3356,"date":"2014-08-21T22:12:45","date_gmt":"2014-08-21T22:12:45","guid":{"rendered":"http:\/\/sterlingsculptures.com\/wp\/?p=3356"},"modified":"2014-08-21T22:12:45","modified_gmt":"2014-08-21T22:12:45","slug":"steampunk-viperfish","status":"publish","type":"post","link":"http:\/\/sterlingsculptures.com\/wp\/?p=3356","title":{"rendered":"Steampunk Viperfish"},"content":{"rendered":"

Here’s a small Work-in-Progress engraving Serge Panchenko’s exquisite Coin Claw Pendant Knife.
\n
\n\"Coin_Claw_Steampunk_Viperfish_51\"
\n<\/a>Above is the finished Coin Claw knife. \u00a0This was a special version of Serge’s Coin Claw, and Serge went all out by making a lovely stainless steel damascus blade, timascus spacer, 6Al4V titanium frame and spring, and a special Grade 2 titanium backplate created especially for engraving.
\n
\n<\/a>\"Coin_Claw_Steampunk_Viperfish_0\"<\/a>
\nThis is the starting canvas. \u00a0The knife alone is like a small, exquisite jewel. \u00a0Everything fits beautifully, and Serge’s finishes are topnotch.<\/p>\n

\"Coin_Claw_Steampunk_Viperfish_1\"<\/a>
\nAbove is the beginning design for a nasty-piece-of-work steampunk viperfish, complete with gear-guts.<\/p>\n

\"Coin_Claw_Steampunk_Viperfish_7\"<\/a>
\nDay 1, I’ve disassembled the knife (seemed like such a shame!) and engraved the major lines of the design, cutting through Serge’s nice stonewashed finish.<\/p>\n

\"Coin_Claw_Steampunk_Viperfish_9\"<\/a>
\nThe next steps are to add in all of the copper and 25 karat gold inlays. \u00a0Above, I’ve begun excavating the pockets for the copper jaw, pectoral fins and tail pivots. \u00a0I’ll follow up the excavation with undercutting the outside edges, and cutting a forest of tinyhooks in the floors of the pockets. \u00a0I’ll wind copper wire in a spiral, using a brass punch to drive the soft metal into the tiny hooks and undercuts, resulting in a solid mass that is permanently trapped in the titanium parent metal.<\/p>\n

\"Coin_Claw_Steampunk_Viperfish_20\"<\/a>
\nHere are the copper inlays left rough from the brass punch.<\/p>\n

\"Coin_Claw_Steampunk_Viperfish_23\"<\/a>
\nAbove, I’ve used diesinker stones to abrade the copper down level with the parent titanium. \u00a0I’ve also begun the copper inlays in the pectoral fin rays.<\/p>\n

\"Coin_Claw_Steampunk_Viperfish_24\"<\/a>
\nMore inlays, including some in 24 karat gold. \u00a0This is the end of Day 2 engraving.<\/p>\n

\"Coin_Claw_Steampunk_Viperfish_25\"<\/a>
\nDay 3. \u00a0Above, I’ve carved the fins and the tail, and inlaid the gold gears. \u00a0Only four more gold inlays to go! And, while I shouldn’t, I couldn’t resist a little background removal just to see how it’s going to look…<\/span><\/p>\n

\"Coin_Claw_Steampunk_Viperfish_26\"<\/a>
\nHere I’ve begun stippling the background with a tiny, sharp carbide punch. \u00a0Background removal and stippling is mind-numbing work, but it really makes the engraving pop!<\/p>\n

\"Coin_Claw_Steampunk_Viperfish_27\"<\/a>
\nAnd, once again even though I probably shouldn’t, I couldn’t resist inking what I’ve engraved so far to see how it’s going to look. \u00a0Even if I do say so myself, it’s going to be good! \u00a0Day 4, I think?\u00a0 I\u2019m not sure where Day 3 went\u2026<\/p>\n

 <\/p>\n

\"Coin_Claw_Steampunk_Viperfish_28\"<\/a>
\nMore background removal, in front of the mouth. \u00a0I’m using a graver to remove a lot of the material before I switch to a small carbide bur.<\/p>\n

\"Coin_Claw_Steampunk_Viperfish_29\"<\/a>
\nAnd more background removal. \u00a0Did I mention that background removal is mind-numbing work?<\/p>\n

\"Coin_Claw_Steampunk_Viperfish_30\"<\/a>
\nHere’s the back plate in the engraver’s vise. I’m still working on background removal and stippling.\u00a0\u00a0You can see the carbide stippling punch in my Lindsay Nitro G20 airgraver. \u00a0Its’ extra power is\u00a0very useful for tough metals like titanium. \u00a0I think this is the end of Day 5.<\/span><\/p>\n

\"Coin_Claw_Steampunk_Viperfish_32\"<\/a>
\nMore background removal – stippled.<\/p>\n

\"Coin_Claw_Steampunk_Viperfish_33\"<\/a>
\nThere’s that section underneath the jaw that still needs the background removed, and then that’s the last\u00a0of the football-sized areas. \u00a0The others should be a bit more interesting and faster.<\/p>\n

\"Coin_Claw_Steampunk_Viperfish_34\"<\/a>
\nAbove, the rest of the background\u00a0excavated and stippled. \u00a0Didn’t I tell you it would go faster? \u00a0This is the end of Day 6.<\/p>\n

\"Coin_Claw_Steampunk_Viperfish_38\"<\/a>
\nAbove, here’s the backplate finished and inked for the last time. \u00a0I’ve engraved all the final details like the pivot pins in the backbone and the plates on the ugly fish’s back. \u00a0I’ve also shaded everything, which helps to make it all pop.<\/p>\n

\"Coin_Claw_Steampunk_Viperfish_40\"<\/a>
\nAnd, of course, I couldn’t leave well enough alone, and decided I needed to add a small surprise for Serge. \u00a0Since I’ve been spending so much time with his little knife, I couldn’t help notice the little banana-shaped area beneath the blade. \u00a0That just cried out for an ugly fish of its’ own…so, above, I’ve engraved the outlines with a small carbide graver. \u00a0This frame is made of 6Al4V titanium, which is a notorious material for engravers. \u00a0However, I discovered that with a really small carbide graver, I could actually engrave lightly in it without too much grief.<\/p>\n

\"Coin_Claw_Steampunk_Viperfish_41\"<\/a>
\nAnd, of course, since the nasty-piece-of-work viperfish on the back is pretty rich with all of her gold, the ugly fish on the front demanded her share as well. \u00a0Above, you can see the eye and the fishing lure light excavated, undercut and hooks raised, ready to inlay.<\/p>\n

Here’s a little hint for the engravers in the audience – if all you have on hand is 28 gauge wire and the blob you want to inlay is a little large, just melt a blob on the end of the wire. \u00a0Problem solved…<\/p>\n

\"Coin_Claw_Steampunk_Viperfish_42\"<\/a>
\nGold in place, and stoned flat. \u00a0Of course, this is where I had a thought. \u00a0It’s rare when that happens, but I noticed that the nice stonewashed background would provide a really nice contrast to bare titanium inside the fish…<\/p>\n

\"Coin_Claw_Steampunk_Viperfish_43\"<\/a>
\nSo , a little later after work with a couple of tiny abrasive stones, a nice silvery fish…<\/p>\n

\"Coin_Claw_Steampunk_Viperfish_44\"<\/a>
\nAbove, shaded, finished and inked<\/p>\n

\"Coin_Claw_Steampunk_Viperfish_46\"
\n<\/a>But, we’re not finished yet – the titanium pivot ring is insisting on a little attention as well…\u00a0 Then, reassemble all of the parts, find the tiny screw that rolled under the bench and\u00a0into the trash on the floor, try to remember if the bronze washer goes on the bottom or the top; no, that’s not the screw for that hole, careful – don’t scratch that part, and then sit in front of the boob tube and admire my handiwork…I wonder if there is any way I can keep this thing? \u00a0Oops, She-Who-Must-Be-Obeyed is saying\u00a0that I have to send it back to Serge…<\/p>\n

Thanks for looking!<\/p>\n","protected":false},"excerpt":{"rendered":"

Here’s a small Work-in-Progress engraving Serge Panchenko’s exquisite Coin Claw Pendant Knife. Above is the finished Coin Claw knife. \u00a0This was a special version of Serge’s Coin Claw, and Serge went all out by making a lovely stainless steel damascus … Continue reading →<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"spay_email":"","jetpack_publicize_message":"","jetpack_is_tweetstorm":false,"jetpack_publicize_feature_enabled":true},"categories":[5,11],"tags":[3,7,4,29],"jetpack_featured_media_url":"","jetpack_publicize_connections":[],"jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/p6qLAy-S8","jetpack-related-posts":[{"id":5685,"url":"http:\/\/sterlingsculptures.com\/wp\/?p=5685","url_meta":{"origin":3356,"position":0},"title":"WESN Knife Koi Tutorial","date":"May 30, 2018","format":false,"excerpt":"I\u2019m baaaaack! Starting a Japanese-style koi engraving on a sweet little WESN folding knife. The Grade 5 titanium (6Al4V) scale is pretty tough stuff, but this little neck knife is so nice I\u2019ll suffer through! Adding 24 karat gold inlays and removing the background on the Grade 5 titanium WESN\u2026","rel":"","context":"In "Carving"","img":{"alt_text":"","src":"https:\/\/i0.wp.com\/sterlingsculptures.com\/wp\/wp-content\/uploads\/2018\/05\/TomSterling_WESN_Knife_Koi_6.jpg?resize=350%2C200","width":350,"height":200},"classes":[]},{"id":3911,"url":"http:\/\/sterlingsculptures.com\/wp\/?p=3911","url_meta":{"origin":3356,"position":1},"title":"Engraving a Serge Panchenko Gen3 Dogtag Knife “Scrolls and Fly”","date":"June 22, 2015","format":false,"excerpt":"Working on a special sergeknives.com Gen 3 Dog Tag with a small surprise. 2 inches long Buy Kamagra UK , bronze. Hopefully it will be done in time for Blade, so visit Serge's table and see it in person! The three steps of removing the background. The bottom image has\u2026","rel":"","context":"In "Carving"","img":{"alt_text":"","src":"https:\/\/i2.wp.com\/sterlingsculptures.com\/wp\/wp-content\/uploads\/2015\/06\/Serge_Panchenko_Gen3_Dogtag_Knife_Scroll_Fly_1.jpg?resize=350%2C200","width":350,"height":200},"classes":[]},{"id":6040,"url":"http:\/\/sterlingsculptures.com\/wp\/?p=6040","url_meta":{"origin":3356,"position":2},"title":"Tom’s Interview with The Maker’s Garage – Carbide3D","date":"March 29, 2022","format":false,"excerpt":"Check out Tom\u2019s podcast interview with Kevin Barnett of Carbide3D - The Maker\u2019s Garage! Hear Tom\u2019s words of wisdom and deep artistic philosophy about CNC and engraving\u2026amaze your friends! Mention that at any coffee shop Kup Lasix bez recepty , hand them ten dollars and you can get a really\u2026","rel":"","context":"In "Carving"","img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":3877,"url":"http:\/\/sterlingsculptures.com\/wp\/?p=3877","url_meta":{"origin":3356,"position":3},"title":"Engraving a Serge Panchenko Bean Knife “Dogfish”","date":"June 22, 2015","format":false,"excerpt":"Starting a new engraving project on one of Serge Panchenko's sweet little Bean folding knives (sergeknives.com). This Bean knife scale is in bronze, and is a dream to cut. Just a bit under three inches long. Adding in the 24 karat gold inlays in the undulating bull kelp fronds. L\u2026","rel":"","context":"In "Carving"","img":{"alt_text":"","src":"https:\/\/i0.wp.com\/sterlingsculptures.com\/wp\/wp-content\/uploads\/2015\/06\/Serge_Dogfish_Bean_Knife_1.jpg?resize=350%2C200","width":350,"height":200},"classes":[]},{"id":2352,"url":"http:\/\/sterlingsculptures.com\/wp\/?p=2352","url_meta":{"origin":3356,"position":4},"title":"Engraving and Carving Antler – Celtic Lizard Pendant","date":"September 24, 2013","format":false,"excerpt":"Well, engraving the tiny Orca knife in antler was so much fun, I just had to continue on in the same vein, so the Celtic Lizard pendant was born. \u00a0A little less than 2 inches tall, engraved and carved from naturally-shed elk antler, with a titanium backing and massive silver\u2026","rel":"","context":"In "Carving"","img":{"alt_text":"Antler_Celtic_Lizard_Pendant_6aWeb","src":"https:\/\/i0.wp.com\/sterlingsculptures.com\/wp\/wp-content\/uploads\/2013\/09\/Antler_Celtic_Lizard_Pendant_6aWeb.jpg?resize=350%2C200","width":350,"height":200},"classes":[]},{"id":3886,"url":"http:\/\/sterlingsculptures.com\/wp\/?p=3886","url_meta":{"origin":3356,"position":5},"title":"Engraving a Serge Panchenko Bean Knife “Koi and Waves”","date":"June 22, 2015","format":false,"excerpt":"Above, Serge\u00a0finished making the other parts and assembled the completed knife. \u00a0Photos courtesy of\u00a0sergeknives.com. Starting another sergeknives.com collaboration on a sweet bronze Bean knife scale, this time with a Japanese-style Koi and Waves theme. There will be a few dots of gold, and a gold koi eye. Sculpting the waves\u2026","rel":"","context":"In "Carving"","img":{"alt_text":"","src":"https:\/\/i0.wp.com\/sterlingsculptures.com\/wp\/wp-content\/uploads\/2015\/06\/Serge_Koi_and_Waves_Bean_Knife_5.jpg?resize=350%2C200","width":350,"height":200},"classes":[]}],"_links":{"self":[{"href":"http:\/\/sterlingsculptures.com\/wp\/index.php?rest_route=\/wp\/v2\/posts\/3356"}],"collection":[{"href":"http:\/\/sterlingsculptures.com\/wp\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/sterlingsculptures.com\/wp\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/sterlingsculptures.com\/wp\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/sterlingsculptures.com\/wp\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=3356"}],"version-history":[{"count":9,"href":"http:\/\/sterlingsculptures.com\/wp\/index.php?rest_route=\/wp\/v2\/posts\/3356\/revisions"}],"predecessor-version":[{"id":3391,"href":"http:\/\/sterlingsculptures.com\/wp\/index.php?rest_route=\/wp\/v2\/posts\/3356\/revisions\/3391"}],"wp:attachment":[{"href":"http:\/\/sterlingsculptures.com\/wp\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=3356"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/sterlingsculptures.com\/wp\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=3356"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/sterlingsculptures.com\/wp\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=3356"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}