-
Recent Posts
Recent Comments
- metal_musings on Traditional Baskets
- George my number is 206-551-3761 on Traditional Baskets
- metal_musings on Steel Bladed Knives
- George Cerrato on Steel Bladed Knives
- metal_musings on Carving the Spawning Sockeyes Netsuke Tutorial
Archives
- March 2022
- September 2020
- August 2020
- April 2020
- December 2019
- February 2019
- June 2018
- May 2018
- October 2017
- August 2017
- July 2017
- June 2017
- March 2017
- December 2016
- November 2016
- October 2016
- September 2016
- August 2016
- July 2016
- April 2016
- March 2016
- January 2016
- December 2015
- October 2015
- September 2015
- July 2015
- June 2015
- April 2015
- March 2015
- January 2015
- December 2014
- November 2014
- October 2014
- September 2014
- August 2014
- July 2014
- June 2014
- April 2014
- March 2014
- February 2014
- December 2013
- November 2013
- October 2013
- September 2013
- August 2013
- July 2013
- June 2013
- May 2013
- April 2013
- March 2013
- November 2012
- October 2012
- July 2012
- May 2012
- April 2012
- March 2012
- February 2012
- January 2012
- December 2011
Categories
Meta
Category Archives: Steampunk
Press-Forming Adventures Part 3
Now it’s time to begin the finishing process. I’m going to be “chasing” the final details here, so will be filling and embedding the copper piece in pitch. But, since I intend to use my Lindsay Airgraver in the chasing … Continue reading
Posted in Carving, Jewelry, Pendant, Press Forming, Steampunk
Tagged carving, fabricated, fabrication, Press Forming, punches, steampunk
Leave a comment
Press-Forming Adventures Part 1
Above images courtesy of BladeGallery.com And a work-in-progress image of my own. In the past I’ve experimented with carving bird skulls from antler, and some with small helmets. While they proved popular, all of the above works were terribly labor … Continue reading
Posted in Carving, Jewelry, Pendant, Press Forming, Steampunk
Tagged carving, fabricated, fabrication, Press Forming, punches, steampunk
4 Comments
Telegraph Key USB Drive #7
Disassembled and ready to engrave the top copper plate. Here are the lines engraved in the top copper plate. The background removed, and a quick inking to see how it will look. Added the fine shading lines, then inked; ready … Continue reading
Posted in Steampunk
Tagged engraved, engraving, fabricated, fabrication, flash drive, steampunk, thumb drive, usb drive
Leave a comment
Telegraph Key USB Drive #6
I turned a keypad from mild steel on the lathe, and soldered it in place with paste solder. Used Birchwood Casey Super Blue (cold gun blue) to darken the brass and steel of the telegraph key. I also soldered the … Continue reading
Posted in Steampunk
Tagged engraved, engraving, fabricated, fabrication, flash drive, steampunk, thumb drive, usb drive
Leave a comment
Telegraph Key USB Drive #5
Here are all the parts, shaped and smoothed. And everything assembled and adjusted from the front side. And from the back. I needed a spring for the telegraph key – turns out a ballpoint pen spring was perfect.
Posted in Steampunk
Tagged engraved, engraving, fabricated, fabrication, flash drive, steampunk, thumb drive, usb drive
Leave a comment
Telegraph Key USB Drive #4
Tapped the bottom plate with 4-40 threads for four socket cap screws and two phillips heads. Above is everything fastened together to test the fit. Starting to refine the forms of the brass parts, above is a side view of … Continue reading
Posted in Steampunk
Tagged engraved, engraving, fabricated, fabrication, flash drive, steampunk, thumb drive, usb drive
Leave a comment
Telegraph Key USB Drive #3
Above, I marked the spots I’ll be drilling using a Sharpie and a set of dividers. If you look closely you can see the little cross marks in the red areas. Here, I’ve used my NSK micromotor grinder and a … Continue reading
Posted in Steampunk
Tagged engraved, engraving, fabricated, fabrication, flash drive, steampunk, thumb drive, usb drive
Leave a comment
Telegraph Key USB Drive #2
Glued up the pieces temporarily with small drops of superglue, and sanded everything nice, square and flush using my disk sander. Above, using a file to clean up the end parts so the cross piece will sit level. I used … Continue reading
Posted in Steampunk
Tagged engraved, engraving, fabricated, fabrication, flash drive, steampunk, thumb drive, usb drive
Leave a comment
Telegraph Key USB Drive #1
Since I finished up the “Puget Sound Dagger” I finally found time to start on my daughter’s Christmas present. Since Christmas is over, I can show it to you! It’s going to be a “steampunk” (Victorian-styled with lots of brass stuff) … Continue reading
Posted in Steampunk
Tagged engraved, engraving, fabricated, fabrication, flash drive, steampunk, thumb drive, usb drive
2 Comments